Sony Ericsson P910a Working Instruction, Mechanical page 20

4. Lift the holder from atop the speaker and set it
5. Lift the speaker from front cover.
6. Obtain a new front cover.
7. Place the speaker into the new front cover's
8. Locate the two catch features that are in the
9. Hook one of the legs of the speaker holder into
10. Rotate the speaker holder down over the speaker
•
Perform the steps of "Reassembly" section starting at the note before step 13 to complete the
reassembly of this phone.
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
aside.
speaker area. When placing the speaker, orient it
so that the speaker's contacts are within the gap in
the side of the speaker area that is opposite to the
location where the tab portion of the speaker cloth
extends for the speaker area.
placement walls around the speaker area.
one of the placement wall catches.
and press down on the speaker holder until the
unlatched leg of the speaker holder snaps into it
corresponding catch feature.
Step-by-Step Instructions
Working Instruction, Mechanical
20(62)