Replacement Of Mechanical Parts; Front Cover - Sony Ericsson P910a Working Instruction, Mechanical

32. Place the battery cover over the battery cavity, so
there is a 4 to 5 MM gap between the bottom of
camera window and top of the battery cover.
33. Press down on grip location on the battery cover
and simultaneously slide battery cover towards
the top of the phone (towards the camera
window).

4 Replacement of Mechanical Parts

4.1

Front Cover

Tools:
•
•
Perform the steps 1 - 22 of "Disassembly" section before proceeding
1. Using 2A (blunt tip) tweezers, slide the tip of one
2. Place a finger over the speaker holder to keep it
3. Twist the tweezers away from the speaker and the
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
2A (blunt tip) ESD-safe tweezers
of the tweezers' arms under the lip of the
accessible leg of the speaker holder.
from flying off when releasing it.
holder should release from its catch on the front
cover.
Step-by-Step Instructions
•
Step-by-Step Instructions
Working Instruction, Mechanical
Lint-free wipes
19(62)