Sony Ericsson P910a Working Instruction, Mechanical page 34

31. Insert the tip of a pair of blunt tip tweezers into
the audio jack hole. Gently rotate the tweezers
down towards the audio jack cover and the audio
jack should lift free from its cavity.
32. Locate the portion of the audio jack cover that is
pressed down around an alignment peg. Using a
pair of blunt tip tweezers, free the audio jack
cover from the alignment peg.
33. Gripping the external portion of the audio jack
cover, pull it perpendicular to the battery cavity
and it should easily side out of the back cover.
34. Orient the audio jack cover so that the side of the
cover with the plug will mate with the hole in the
audio jack once installed.
35. Slide the leg of the audio jack cover through the
hole in the new back cover indicated.
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
34(62)