Sony Ericsson P910a Working Instruction, Mechanical page 10

NOTE!
2. Rotate the circuit board towards the back cover
so that the jog dial's flex connection can reach
its corresponding connector on the board.
3. Plug the jog dial flex film connection to the
board and rotate the board down into the back
cover.
NOTE!
3/00021-1/FEA 209 544/90 A

Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Be careful not to damage the vibrator
contacts or the audio jack contacts when
connecting the jog dial to the circuit
board.
Check the vibrator contacts and the
audio jack contacts to make sure that
you did not damage them during the
process of connecting the jog dial to the
circuit board.
Working Instruction, Mechanical
10(62)