Some menus/features are operator dependent.
Assembling Your Phone
Before attempting to use your phone, you must complete
the following steps:
•
Step 1: Attach the Battery
•
Step 2: Attach the Back Cover
•
Step 3: Charge the Battery
Step 1: Attach the Battery
4
This is the Internet version of the user's guide. *Print out for private use only.
1
Locate the plug at the end of
the wires.
2
Insert the plug. The plug will
only properly fit one way - do
not force it.
3
Lay the battery into place.
Step 2: Attach the Back Cover
Note!
Never use your phone with the front cover or
back cover removed. For more information on
changing the front cover, see "Changing Front
Covers" on page 17.
Assembling Your Phone
1
Locate the notches along
each side of the back of
the phone.
2
Using the notches as a guide,
place the back cover so that it
rests against the phone.
3
Slide the back cover upward
until it clicks in place.