Monitor Panel Operations; Getting Started; Initial Settings - Kenwood DDX719WBTL Instruction Manual

Basic Operations Basic Operations

Monitor panel operations

(Only for DDX719WBTL/DMX719WBTL/DDX6019BT/
DMX6019BT)
1
Display the <Angle Adjust> screen.
DDX719WBTL DDX6019BT
DMX719WBTL/DMX6019BT:
Press MENU on the monitor panel to display the
pop-up short-cut menu, then touch [Angle].
2
Perform the adjustment or operation.
E.g. Angle adjust screen for DDX719WBTL
6 ENGLISH
[0] – [6] Selects a monitor angle.
(The monitor panel will stay in
this angle when you turn on
the unit.)
<Off Position> Sets the angle of the monitor
when the ignition switch of the
vehicle is turned off or when
you turn off the unit.
• Select the monitor angle,
then touch [Memory].
[ M DISC EJECT] (Only for DDX719WBTL/
DDX6019BT)
Ejects the disc.
To return the monitor panel to
the selected angle:
Press M on the monitor panel.
• To return to the previous screen, touch [
setting screen.

Getting Started

Getting Started

Initial settings

When you power on the unit for the first time, the
<Initial SETUP> screen appears.
Perform the initial settings.
E.g. Initial settings screen
Once completed, a warning message appears. Touch
[Agree] to display the Home screen.
] on the
[Language]*1
Select the text language used for on-screen
information.
Touch [Language Select], then select the language.
• American English(en) (Initial)/British English(en)/
Nederlands(nl)/Français(fr)/Deutsch(de)/
Italiano(it)/Español(es)/(ar)
Português(pt)/Čeština(cs)/Polski(pl)/Magyar(hu)/
Руccĸий(ru)/
(zh)/(he)
(ms)/Bahasa Indonesia(id)
/Ελληνικά(el)/
(th)/Türkçe(tr)/ (zh)/
/(fa) /Bahasa Melayu