Features - ITW Simco-Ion IQ Power Installation And Operating Instructions Manual

Static neutralizing system with bps power supply

Hide thumbs Also See for Simco-Ion IQ Power:

Table of Contents

Features

• Three types of IQ Power™ static neutralizing bars are available to suit the

specific application.

• Static bar disconnect plug pre-installed on static bar cable for quick and easy

installation. Plug also identifies bar type to power supply automating power

supply set-up.

• Single momentary push-button calibration simplifies set-up.

• Ionization emitter points current limited to enhance operator safety.

• Ionization emitter points of special alloy to extend operating life of emitter

points.

• Continuous "T" slot at back of static bar and mounting brackets for easy and

flexible installation.

• Bar graph display on power supply indicates ionizing performance of system.

• Indicators on power supply display status of neutralizing system, power, service

required and detection of system faults.

• Relay contact output "echoes" indicators on power supply for remote sensing and

alarm.

• Optional computer interface allows for remote monitoring and logging of the

system's performance.

• Optional web speed encoder for gathering web speed data.

• Optional control station that provides power and a communication hub for IQ

Power™ static neutralizing systems.

I Q Power™ B PS

5 20 11 97 Re v. D

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Simco-Ion IQ Power and is the answer not in the manual?