JLG X390AJ-X14J Supplement Manual page 46

Charging Current
Maximum current required for the battery charger
depends on the battery pack voltage and on the local net-
work voltage 110 -230V.
For CE spec machines, the maximum current is set at:
• 25A for 48V battery pack
• 30A for 72V and 83V battery pack
• 18A for 38V battery pack
• 13A for 76V battery pack
For ANSI marked machines, the maximum current is set at:
• 18A for 48V battery pack
• 13A for 72V and 83V battery pack
• 18A for 38V battery pack
• 13A for 76V battery pack
NOTE: These values are factory set, but can be changed
locally by means of the RamHino Tool.
31215460
SECTION 2 - SERVICE PROCEDURE
2-33