KitchenAid Ensemble KGHS01PMT/WH Technical Education page 62

g) To remove the coils from the burner
assembly, remove the two screws from
the bracket, and lift the two coils off the
cores.
5. To remove the flame sensor:
a) Remove the two hex-head screws from
the venturi and pull it forward so you
can access the flame sensor.
High-Limit Thermostat
Flame Sensor
Venturi Screws
Bracket Screws
Coils
b) Remove the hex-head screw from the
flame sensor and remove the sensor
from the venturi.
Flame Sensor
6. To remove the high-limit thermostat:
a) Remove the venturi (see step 5).
b) Disconnect the two wire connectors
from the high-limit thermostat.
c) Remove the two hex-head screws from
the high-limit thermostat and remove
the thermostat.
Screw
Wires
4-20
Screw
High-Limit Thermostat
Screw