Removing The Drum Light Socket - KitchenAid Ensemble KGHS01PMT/WH Technical Education

REMOVING THE DRUM LIGHT SOCKET

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Open the dryer door.
4. Remove the screw from the drum light
lens and remove the lens.
Drum Light Lens
5.
6.
7.
Lens Screw
4-15
Remove the bulb from the drum light
socket.
Remove the screw from the drum light
holder and pull it forward so you can
access the wires.
Drum Light
Holder Screw
Bulb
Disconnect the wire connectors from the
light socket terminals.
Wire Connectors
Light Socket
Continued on the next page.