KitchenAid Ensemble KGHS01PMT/WH Technical Education page 45

8. Remove the following connectors and
wires from the electronic control board:
5-wire connector at P1.
Red and black wires at relay K1.
7-wire connector at P2.
Ribbon cables at P3 and P4.
P1 Relay K1
Electronic Control
Board
1/4" Screw
9. Remove the 1/4" hex-head screw from the
electronic control board.
P2
Ribbon Cables 3-Wire
P3 & P4 Connector
10. Squeeze the two board supports and re-
move the electronic control board from the
bracket.
Squeeze Ends Of Supports To Remove Board
4-3