KitchenAid Ensemble KGHS01PMT/WH Technical Education page 26

PLAN VENT SYSTEM
Typical Exhaust Installations
Typical installations vent the dryer from the
rear of the dryer. Other installations are pos-
sible.
1
1. Dryer 6. Rigid metal or flexible metal vent
2. Elbow 7. Vent length necessary to connect
3. Wall
4. Exhaust hood 8. Exhaust outlet
5. Clamps
Optional Exhaust Installations
This dryer can be converted to exhaust out the
right side, left side, or through the bottom.
Contact your local dealer to have the dryer
converted.
2
3
4
5
6
7
8
elbows
WARNING
Cover unused exhaust holes with the
following kit:
280028 (meteorite)
279818 (white)
Contact your local dealer.
Failure to follow these instructions can
result in death, fire, electrical shock, or
serious injury.
1
1. Standard rear offset exhaust installation
2. Left or right side exhaust installation
3. Bottom exhaust installation (Not an option with
pedestal installations.)
Alternate Installations For Close Clearances
Venting systems come in many varieties. Se-
lect the type best for your installation. Two
close-clearance installations are shown. Refer
to the manufacturer's instructions.
1. Over the top installation (also available with one
offset elbow)
2. Periscope installation
2-16
Fire Hazard
2
1 2
3