DRUM INSTALLATION NOTE: Be sure to
position the drum with the clip toward the front
when you reinstall it.
Front
Install Drum
NOTE: There are two rollers on the front panel
and two on the rear panel, as shown below.
Position Clip
Towards Front
12. To remove a roller:
4-14
Front Panel (inside)
Front Rollers
a) Pry the sides of the triangular ring out
of the groove in the roller support with
a small screwdriver.
Triangular Ring (Partially Removed)
b) Slide the roller off the roller support.
Roller Support
Rear Panel (inside)
Rear Rollers