Siemens PM330 Hardware Installation Manual page 50

Connecting up, switching on
4.4 Installation set for line-side cable connection, left
3. Final state with mounted installation set, tightening torque for the fixing screws
Figure 4-11
4. The cable entry protection
cable to be introduced.
Figure 4-12
48
Installing the mounting kit, step 3
⑥
must be broken out corresponding to the diameter of the
Installing the mounting kit, step 4
Hardware Installation Manual, 12/2018, A5E32844552B AF
⑤
: 50 Nm
Power Module PM330