Connecting up, switching on
4.4 Installation set for line-side cable connection, left
Installing the "Mounting kit for line-side cable connection, left" 6SL3366-1LH00-0PA0 for frame size
HX
The mounting kit is installed in 4 steps:
1. Remove the busbar adapter for the cable outlet towards the top and the adapter for the
PE connection towards the top
Use the 14 screws (incl. PE) again for mounting the installation set.
Figure 4-9
46
①
Installing the mounting kit, step 1
.
Hardware Installation Manual, 12/2018, A5E32844552B AF
Power Module PM330