Siemens PM330 Hardware Installation Manual page 39

Line and motor terminals
Frame sizes GX, HX
The diagram shows the layout
of line and motor terminals and
terminal strip X9.
Optionally, the line connection
can be established using the
"Installation set for line-side
cable connection, left", see
Chapter "Installation set for line-
side cable connection, left
(Page 43)".
Tightening torques for the line,
motor and PE terminals (M12):
50 Nm
The cable entry protection (
must be broken out correspond-
ing to the diameter of the cable
to be introduced.
After connecting, the covers of
the line and motor terminals
must be reinstalled (tightening
torque: 6 Nm).
Power Module PM330
Hardware Installation Manual, 12/2018, A5E32844552B AF
①
)
Connecting up, switching on
4.2 Line, motor and DC link connection
37