CommScope SYSTIMAX 360 iPatch 360G2-iP-32-MPO-SD-KIT-5PK Instruction Sheet page 13

www.commscope.com
8. When working with 1U internal sliding shelf, cut corrugated tubing to fit over panel bus jumper inside of
shelf to protect panel bus jumper from internal sliding shelf movement. Internal sliding shelf has excess
panel bus jumper coiled and secured with cable ties on shelf floor, as shown on next page.
Backplane
Kit
9. Return shelf to rack.
10. Replace cable trough using captive screws on each end of trough.
11. Replace the shelf's top cover.
Feed panel
bus jumper
Corrugated
tubing
Ribbon
Panel bus jumper
coiled and secured
Note: Keep panel bus jumper
and ribbon cables clear from
edge of sliding shelf.
860543388
Instruction Sheet
860543388-012
Page 13 of 19