CommScope SYSTIMAX 360 iPatch 360G2-iP-32-MPO-SD-KIT-5PK Instruction Sheet page 10

860543388
Instruction Sheet
2. Place the iPatch upgrade kit on the front of the tray, being careful to pull the ribbon cable through opening
in the center of tray at the same time. Do not allow cable to be kinked or damaged. Cable will be pulled
to back of shelf when connecting to backplane kit.
Note: Ensure that the ribbon cable is still firmly connected to the back of the iPatch upgrade kit. If the
connector does need re-inserting, orient it so the red dot is facing the top edge of the kit for correct
alignment with the connection on the back of the kit.
3. Once the iPatch upgrade kit is seated over the MPO distribution panel, push on center and both release
latches at sides of the kit to engage the latches and secure kit.
4. Repeat for all modular pair trays.
5. Follow items 5 through 11 of the HD sliding modular cassette below.
HD 1U/2U/4U Sliding Modular Cassette Shelf
Modular pair tray
Distribution panel
(2 places)
1. Slide modular pair tray forward for access. Trays slide to the front of the shelf separately until reaching
stops that prevent them from sliding out.
2. Place the iPatch upgrade kit on the front of the tray, being careful to pull the ribbon cable through opening
in the center of tray at the same time. Do not allow cable to be kinked or damaged. Cable will be pulled
to back of shelf when connecting to backplane kit.
Note: Ensure that the ribbon cable is still firmly connected to the back of the iPatch upgrade kit. If the
connector does need re-inserting, orient it so the red dot is facing the top edge of the kit for correct
alignment with the connection on the back of the kit.
3. Once the iPatch upgrade kit is seated over the MPO distribution panel, push on center and both release
latches at sides of the kit to engage the latches and secure kit.
4. Repeat for all modular pair trays.
5. Insert the panel bus jumper 5-pin connector into the shelf through opening in back of side wall, to be
connected to backplane kit as shown in Detail A.
Page 10 of 19
Ribbon cable
Release latch
www.commscope.com
Ribbon cable
iPatch
upgrade kit
860543388-009
Shelf is not shown for clarity