Advertisement
User Manual
Installation of the mounting handles
1. Remove the four screws from either side of the top panel.
2. Remove the four screws from both side
panels which lock the power bracket into
place.
3. Move the power bracket slightly to the
position shown here (->). This will allow
easier access when removing the ethernet
connection in a later step.
4. Remove the connector that is housed
between the main PCB and power board.
Please see here (->) for more information.
5. Remove the power board bracket by tilting to
one side gently.
6. Remove the ethernet connection as shown
here (->).
7. Lock the handles at either side of the front
panel using screws in the places shown here
(->).
8. Refit all removed parts securely.
English
Advertisement
