Advertisement
User Manual
English
Network
This matrix can be controlled via Lan through Telnet. The default IP address for matrix access is
192.168.10.254.
Select DHCP to allow the unit to automatically detect the IP address.
Select Apply to save any changes.
Please note: The Matrixes' LAN module will auto reboot after changing the Network settings.
Set Static IP:
Please note: the IP address and gateway should be set up on the same segment of the network
If an IP address is not automatically detected, select Static to manually input the IP functions. Enter the
IP address ensuring it is in the same subnet segment and the PC.
Select Apply to save any changes.
Please note: The Matrixes' LAN module will auto reboot after changing the Network settings.
Set Static IP:
Change Password
This setting allows the user to modify the Login Password and Admin Setting password/
The default Login password is admin. The default Admin Setting password is 123456.
Select Save to save any changes.
Please note: any new password must be between 4-16 characters in alphanumeric characters only.
Please note: If the password has been forgotten, please use the Web-Gui or API command to reset the
matrix to factory settings.
This can be done by running the Web-Gui tool, highlighting and selecting the matrix. The select device
from the side panel and click factory default. Select Y in the pop window to restore the matrix to factory
default settings.
Advertisement
