Advertisement
User Manual
To get
audio input
Command:
status
GET AUDIOIN in[CR/LF]
Return:
AUDIOMP in out[CR/LF]
Parameter:
※ in = {in1-in11，all};
※ prm = {hdmi/hdbt, audioin};
Description:
To set
output
Command:
resolution
SET VIDOUT_RES out prm[CR/LF]
Return:
VIDOUT_RES out prm[CR/LF]
Description:
※ out = {out1~out11}
※ prm = {1~26}
{1 : 3840x2160@60
2 : 3840x2160@30
3 : 1920x1200@60
4 : 1920x1080@60
5 : 1280x720@60
6 : 1600x1200@60
7 : 1280x800@60
8 : 1024x768@60
9 : AUTO(preferred native timing of the display)}
Syntax
Syntax
Example
Command:
GET AUDIOIN in1[CR/LF]
Return:
AUDIOIN in1 hdmi/hdbt[CR/LF]
Description:
Get the audio source of the in1, the
result is hdmi.
Example
Command:
SET VIDOUT_RES out1 5[CR/LF]
Return:
VIDOUT_RES out1 5[CR/LF]
Description:
Set HDMI out resolution is
1280x720@60.
English
Advertisement
