Enthermics Titan Series Operator's Manual page 40

M
AINTENANCE
Yearly cleaning
procedure
Result
40
Continued from previous page
To clean the warmer yearly, do the following.
Step Action
1. Make sure that the warmer is disconnected from electric power and cool.
Remove
2. the screws
Remove the support assembly
a
3. Clean the support assembly and interior with a damp cloth.
4. Dry the interior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
Clean
5. each side of the window pane with glass cleaner or distilled vinegar.
6. Re-install the support assembly.
The warmer is now clean.
a
from the support assembly.
b from the interior of the warmer.
WARNING:
Personal injury hazard.
The blankets may overheat if the support assembly is
not in place. Make sure to re-install the support
assembly before operating the warmer.
B l an k e t W a rm e r Op er a to r ' s Ma n u al
▪
b
EC-TS-004566
M N- 39 9 2 4 Rev 3
▪ ▪
3/ 2 0
▪