How To Clean The Warmer - Enthermics Titan Series Operator's Manual

How to Clean the Warmer

Before you begin
Monthly cleaning
procedure
B la n k et W ar m er Op e r at or ' s Man u a l
▪
WARNING:
Disconnect the warmer from electric power before cleaning.
CAUTION:
Allow the warmer to cool before cleaning.
Do not use:
NOTICE
▪
abrasive cleaning compounds.
▪
chloride based cleaners.
▪
commercial or household cleaners containing ammonia.
▪
cleaners containing quaternary salts.
To clean the warmer monthly, do the following.
Step Action
Make sure
1. that the warmer is disconnected from electric power and cool.
2. Wipe the outside of the warmer:
with a stainless steel cleaner, if stainless steel panels.
▪
with an all purpose cleaner, if painted panels.
▪
3. Vacuum lint from fan openings, fan sail switch, and vent openings (if
applicable).
4. Clean the interior of the warmer with a damp cloth.
Dry
5. the interior and exterior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
6. Clean each side of the window pane with glass cleaner or distilled vinegar.
MN -3 9 92 4 Re v 3 3 / 2 0
▪ ▪ ▪
Electric shock hazard.
Burn hazard.
M
AINTENANCE
Continued on next page
39