How To Change The Temperature Scale; How To Change The Sound Settings - Enthermics Titan Series Operator's Manual

O
PERATION

How to Change the Temperature Scale

Before you begin
Procedure
Result

How to Change the Sound Settings

Before you begin
Procedure
Result
34
The warmer must be connected to electric power and the screen turned off.
To change the temperature scale from °F to °C and vice versa, do the following.
Step Action
Press and hold
1. the standby button
release the button.
2. Press and hold the temperature recall button
digits disappears and only the F or C display, then release the button.
3. Press the up and down arrow buttons
temperature scales.
4. Press the standby button
The temperature scale has now been changed.
The warmer must be connected to electric power and the screen turned off.
To change the sound settings, do the following.
Step Action
Press and hold
1. the standby button
release the button.
2. Press and while holding
down arrow button
Once the sound volume setting displays, release both buttons.
3. Press the up and down arrow buttons
The volume range is 0 (mute) to 12 (maximum).
Press
4. the standby button
The sound setting has now been changed.
until the screen turns off, then
to turn the screen on.
until the screen turns off, then
the temperature recall button
.
to turn the screen on.
B l an k e t W a rm e r Op er a to r ' s Ma n u al
▪
until the temperature
to toggle between the
, press the
to adjust the volume.
M N- 39 9 2 4 Rev 3 3/ 2 0
▪ ▪ ▪