How To Install The Warmer - Enthermics Titan Series Operator's Manual

I
NSTALLATION

How to Install the Warmer

Before you begin
Requirements
Voltages
Position the warmer
28
you have:
Make sure
An appropriate lifting device and enough personnel to safely move and position
the weight of the warmer.
▪
The warmer must be installed on a level surface.
▪
The warmer must not be installed in any area where it may be affected by steam,
dripping water, high temperature, or any other severely adverse conditions.
Model
EC/DC 250
EC/DC 350
EC/DC 750
To position the warmer, do the following.
Step Action
1. Make sure that:
The location where the warmer is being installed is rated to support the
▪
weight of the warmer;
The warmer is within five feet of the appropriate electrical outlet;
▪
You follow the warmer clearance guidelines. Refer to topic Specification
▪
Information for clearance requirements.
2. Move the warmer to the installation location and onto the final resting
surface.
3. Lock the casters, if equipped.
The warmer is now correctly positioned.
V Ph
120 1
220 1
230 1
120 1
220 1
230 1
120 1
220 1
230 1
B l an k e t W a rm e r Op er a to r ' s Ma n u al
▪
Hz kW
60 0.6
60 0.6
50/60 0.6
60 0.8
50 0.8
50/60 0.8
60 0.8
50 0.8
50/60 0.8
Continued on next page
M N- 39 9 2 4 Rev 3 3/ 2 0
▪ ▪ ▪