How To Change The Temperature Scale; How To Change The Sound Settings - Enthermics Designer Series Operator's Manual

How to Change the Temperature Scale

Before you begin
Procedure
Result

How to Change the Sound Settings

Before you begin
Procedure
Result
B la n k et W ar m er Op e r at or ' s Man u a l
▪
The warmer must be connected to electric power and the screen turned off.
To change the temperature scale from °F to °C and vice versa, do the following.
Step Action
Press and hold
1. the ON/OFF button
release the button.
2. Press and hold the temperature recall button
digits disappears and only the F or C display, then release the button.
3. Press the up and down arrow buttons
temperature scales.
4. Press the ON/OFF button
The temperature scale has now been changed.
The warmer must be connected to electric power and the screen turned off.
To change the sound settings, do the following.
Step Action
1. Press and hold the ON/OFF button
release the button.
2. Press and while holding
down arrow button
Once the sound volume setting displays, release both buttons.
Press
3. the up and down arrow buttons
The volume range is 0 (mute) to 12 (maximum).
4. Press the ON/OFF button
The sound setting has now been changed.
MN -4 6 42 7 Re v 1 6 / 1 9
▪ ▪ ▪
until the screen turns off, then
to toggle between the
to turn the screen on.
until the screen turns off, then
the temperature recall button
.
to adjust the volume.
to turn the screen on.
O
PERATION
until the temperature
, press the
29