USC LPV Series Operator's Manual page 36

General Panel Descriptions:

The Automated Main Control Panel is a plug connected enclosure that contains
the PLC (Programmable Logic Controller) as well as the HMI (Human Machine
Interface) touch screen. The operator is able to control the entire system through
the HMI. Power to this panel is supplied by a standard 110V plug.

The LPV Automated Treater Panel is an enclosure that contains the electrical
components required to actuate the seed treater. This includes the VFDs for the
atomizer and seed wheel. Power for the treater is supplied here. Power to this
panel is hard wired.

The LPV I/O Control Panel is an enclosure that contains the electrical components
required to actuate the drum tilt actuator. This includes the proximity sensors for
the seed wheel. Power to this panel is supplied by a standard 110V plug.
Page 36
LPV SEED TREATER