USC LPV Series Operator's Manual page 21

Seed treater

Hide thumbs Also See for LPV Series:

Table of Contents

STEP 6: Insert a cotter pin (06-09-0087) in the

clevis pins at both ends of the actuator.

Then, attach the yellow cable to the motor

connector

After the actuator is installed it should move freely by hand.

NOTICE

If something is binding, damage to the actuator or the mounting

brackets could occur.

Après l'actionneur est installé, il doit se déplacer librement à la main.

AVIS

Si quelque chose est obligatoire, les dommages à l'actionneur ou les

supports de montage pourrait se produire.

LPV SEED TREATER

LPV AUTOMATED TREATER SET - UP

Page 21

Table of Contents