STEP 3: Lower the drum slowly until the drum
frame is resting on the dead stop pins on both
sides of the treater frame.
STEP 5: Insert the second clevis pin
(06-09-0058) and the two flat washers
(06-05-0005) attaching the end of the
actuator piston to the bracket on the drum frame.
The washers should be on the outside of the
frame bracket.
Page 20
LPV SEED TREATER
LPV AUTOMATED TREATER SET - UP
STEP 4: Insert a clevis pin (06-09-0058)
attaching the bottom of the actuator to the
bracket on the treater frame cross member.