Universal 'S' Blade - Gastroback DESIGN FOOD PROCESSOR ADVANCED Operating Instructions Manual

Universal 's' blade

blade is correct assembled if the central plastic section faces upwards and flushes
with the wider part of the spindle. The blade is placed a few millimetres above the
bottom of the processing bowl.
5. Position the lid onto the processing bowl (picture L). You will notice a solid grey
arrow to the left of the holding lip on the lid, when placing the lid onto the bowl
this arrow needs to align with the solid grey arrow on the handle of the bowl
(picture M). To lock, turn the lid clockwise. The lid has four guiding pins which
have to fit into the cannelure of the processing bowl (picture N) in order to lock
the lid. Turn the lid clockwise and push up against. The lid is securely locked in
position if the arrow on the handle is facing the line on the lid.
Note:
If the processing bowl and cover are not correctly assembled, the Food Processor
will not operate. This is a safety feature.
6. Prepare your food and fill it in the processing bowl. If necessary cut the food in
proper size to fit through the feed chute (see ›Tips for preparing the food‹).
7. For maximum control when using your food processor, before turning on your
food processor load the feed tube and fit the food pusher on top.
Note:
8. To insert the internal pusher pay attention to the guiding pins on the edge of the
internal pusher and the line mark on the top of the pusher. The food pusher has
matching cannelures and a line mark as well. Place the internal pusher inside the
food pusher and turn it until the line marks are facing each other.
WARNING: Do not push products into the feed chute with your O fingers or
foreign objects. Always use the food pusher provided. While proceeding do not
push the food pusher too hard down.
For cutting vegetables, fish or meat, kneading batter or making
shakes, soups or ice cream use the universal ›s‹ blade.
WARNING: Use caution, as blades are sharp. Always
handle the processing blade by its central plastic section.
Fit the universal ›s‹ blade onto the spindle and press firmly into
place. Ensure the blade is securely locked on the spindle. The
The food pusher consists of two parts: the food pusher and
an internal pusher with measuring scale. Ensure the internal
pusher is inserted an locked within the food pusher before
using the food pusher.
59