Important Instructions - Gastroback DESIGN FOOD PROCESSOR ADVANCED Operating Instructions Manual

IMPORTANT INSTRUCTIONS

WARNING: To avoid injury to persons and damage, always turn the
appliance OFF, wait for the motor to stop completely and unplug the
appliance, immediately after operation and before assembling/disassem-
bling or cleaning the appliance.
WARNING: The blades and discs are very sharp. Pay attention when
handling the units. Only touch the discs and blades on the edge and
handle with care when cleaning.
Note:
All attachments must be firmly attached to the spindle. Always adjust
the attachments until you are sure that they are correctly fitted.
• ATTENTION: If the ON-/OFF-button is pressed and the processing
bowl is not locked onto the motorblock yet the ON-/OFF-button does
not illuminate. Placing the processing bowl onto the motorblock while
the ON-/OFF-button is pressed the motor starts running immediately.
• While proceeding do not push the food pusher too hard down to avo-
id overloading the motor. If the motor stalls or stucks during operation
or if the fibre of the food blocks the blade, immediately turn ›OFF‹
the appliance and unplug the power cord. Check whether there is
any obstruction in the processing bowl, and remove it (see 'Care and
Cleaning').
WARNING: Do not push products into the feed chute with your fingers
or foreign objects. Always use the food pusher provided. Never use force.
Note:
The appliance will not turn 'ON‹ unless the appliance is properly assem-
bled.
• ›Pulse‹ button: The appliance is working in intervals. The motor is only
running as long as you hold the button down. Releasing the button the
motor turns ›OFF‹ automatically.
• Button: ›ON‹: the button illuminates in orange, the motor is running
permanently until you press the On/Off button again to turn the appli-
ance ›OFF‹.
48