Page 1
GASTROBACK ® Instructions for use Food Slicer/Shredder Attachment Accessory Design Stand Mixer Advanced Read all provided instructions before first usage! Art.-Nr. 98102 Model and attachments are subject to change...
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. Important Instructions • The appliance is designed for normal household quantities. Do not operate or store the appliance outdoors or in damp or wet areas. •...
Page 3
The Food Slicer/Shredder Attachment thick slicer application ring nut fine shredder application food pusher thin slicer application feed chute coarse shredder application housing driveshaft...
Page 4
Food Slicer/Shredder Attachment Operating Before first use of the Food Slicer/Shredder Attachment Remove all promotional materials and packing as well as any foreign objects, but do not remove the model label. Before first use and after a long period of storage, clean the processing tools in warm soapy water (see ´Care and Cleaning`).
Page 5
The Food Slicer/Shredder Attachment is now assembled and can be attached to the Design Standmixer Advanced. 6. Prop up the attachment access (picture E). 7. Press down the attachment ejector (picture F) and slide the Food Slicer/Shredder Attachment into the opening. Release the attachment ejector and turn the Food Slicer/Shredder Attachment slightly so that the shaft engages in the socket with pin of the access opening located in the hole of the attachment.
Page 6
WARNING: Never hold your face or other body parts over the feed chute when the motor is running because little pieces of food could be thrown out of the feed chute. Never push the food through the feed chute. ATTENTION: Avoid contact the moving parts. Keep hands, hair, clothing, as well as spatula and other utensils, away from feed chute during operation to prevent injury and/or damage to the appliance.
3. Take off the ring nut by turning it anticlockwise. NOTE: In order to avoid injury, use a towel or something protective to grip the ring nut. 4. Turn the housing around and the application will slide out off the housing (picture B). Ensure the application will not fall on the floor when sliding it out.
or cleaning sponge for cleaning. Rinse all parts with running water and dry them accurately. NOTE: Some foods such as carrots may stain the housing. These stains may be removed by placing the housing in the dishwasher or rub a small amount of of or shortening over the stains, wash in warm sudsy water and rinse.
Page 9
Recipes Teriyaki Vegetable Sauté for 4-6 persons 4 medium carrots, peeled and cut into thirds 1 medium red or green bell pepper, cut in fourth 1 medium onions, cut in fourth 1 teaspoon 1/4 teaspoon red pepper flakes 1 teaspoon sugar 1 teaspoon starch...
Page 10
Assemble the application, using the fine shredding application and attach to mixer. Turn to speed 4 and shred carrots into large bowl placed under outlet. Set aside. Combine flour, whole meal flour, sugar, baking soda, salt, and nutmeg in mixer bowl.
Page 11
Accessories for the Design Stand Mixer Advanced You will get the accessories from your specialty retailer. Pasta Maker Attachment Art.-Nr.: 98100 Meat Grinder / Cookie Attachment Art.-Nr.: 98101 Food Slicer/ Shredder Attachment Art.-Nr.: 98102 Additional stainless steel bowl Art.-Nr.: 98103...
Need help?
Do you have a question about the 98102 and is the answer not in the manual?
Questions and answers