General Information; Safety; Target Group; Changes - Signode BXT3-13 Service Manual

Battery-operated hand tool for plastic strapping
Hide thumbs Also See for BXT3-13:
Table of Contents

Advertisement

1

General information

The purpose of this service manual is to get experienced technicians familiar with the technical features of the tool,
in order to be independent in carrying out maintenance and repair work.
The current operating instructions and the document «Parts lists & Exploded drawings» of the tool as
well as the respective product information sheets are an integral component of this manual and must be
consulted in all cases.
Meaning of warning symbols. representation convections
DANGER
This text describes an extremely dangerous situation in which failure to observe the safety instruc-
tions will result in death or serious injury.
WARNING
This text describes a dangerous situation in which failure to observe the safety instructions can
result in death or serious injury.
CAUTION
This text describes a dangerous situation in which failure to observe the safety instructions can
result in minor injury.
!
ATTENTION
This text describes a situation that may lead to property damage or adverse operating results.
This text describes useful supplementing information.
► This symbol indicates handling steps.
– This symbol indicates results from the handling steps.
● This symbol indicates lists.
1.1

Safety

This manual must be read and understood by all persons who carry out repair and service work on the respective
strapping devices.
Use only original parts for repair and service work. Disregarding this may lead to damage to the device or
in the worst case, to personal injury.
1.2

Target group

This manual is intended for those technicians that are already familiar with the repair and service work of strapping
devices. The manual can also be used for training purposes for new employees.
1.3

Changes

The production lines and the technical design of the strapping devices are permanently optimised.
In case the respective changes have an influence on the device performance, service or spare parts, a product
information shall be prepared.
A current version of the operating instructions and the document «Parts lists & Exploded drawings" as well as the
respective product informations are a fundamental component of this manual and must also be observed.
4 von 37
ENGLISH
Service Manual BXT3-13/16/19
V 07.17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bxt3-16Bxt3-19

Table of Contents