Table of Contents
Advertisement
This manual gives you information on how to operate and maintain your Signode Power
Only trained personnel should operate or service machine.
Read these safety instructions before operating or servicing your machine.
OPERATING MACHINE
BEFORE
1.
Read the operating instructions.
2.
Wear eye or face, and hand protection.
3.
Inspect the machine for unsafe conditions
DAILY and replace any worn or broken
parts.
4.
Check that all guards are in place and all
safety devices are working properly. Do not
operate machine with any safety devices
removed.
5.
Make sure machine is clear of all tools, debris
and other objects not related to machine
function.
DURING
1.
Do not wear loose clothing or jewelry.
2.
Never put any part of your body into, under or
near moving machinery.
3.
Keep hands out of the strap chute area.
AFTER
1.
Shut off all electric an air power.
2.
Remove all tools, debris, and other objects
from machine area.
Read all of the signs on
machine.
ADDITIONAL SAFETY INSTRUCTIONS ARE LOCATED THROUGHOUT THIS
MANUAL. THEY SERVE TO WARN THE OPERATOR AND SERVICEMAN
ABOUT POTENTIALLY HAZARDOUS SITUATIONS.
GENERAL SAFETY
Strapping Machine.
1.
2.
3.
4.
5.
6.
ADDITIONAL CONSIDERATIONS
Do not remove any
signs from machine
2
SERVICING MACHINE
Shut off and lock out electric and air
power.
Remove packages from machine.
Do not stand or walk on conveyor service
machine.
Follow the maintenance instructions in
your manual.
Use the correct tools to repair machine.
Never adjust, repair or oil moving
machinery.
To insure proper operation of machine,
use the specified electric and/or air
power sources.
Do not overload machine by exceeding
Signode's recommended performance
limitations.
Do not attempt to after machine design
unless written approval is received from
Signode
Corporation.
Keep your Operation, Service and Safety
Manual at your machine. Refer to it －
often.
Replace all missing or
damaged signs.
Hide quick links:
Advertisement
Table of Contents
