Rf Path Deembedding - Keysight N4375D User Manual

RF Path Deembedding

Keysight N4375D Lightwave Component Analyzer, User's Guide
• File lets you use the results of a measurement of the
optical path to characterize the source or receiver optical
path.
These results need to be in the form of a 2- port 
S- parameter data files (also known as Touchstone .s2p
data files).
Only the s21 values of the file are used for correction of
the transmission properties. All other parameters are
ignored.
To assign a file,
a Click at the right of the field to which you want
to assign a file.
b Locate and select the file in the explorer window.
Enable
Select if you want the LCA to compensate for the RF
connections to the DUT.
Use the results of a measurement of the RF path to
characterize the source or receiver RF path.
• For Single- Ended measurements, Src 1 corresponds to the
path to Port A, and Rcv 1 corresponds to the path to Port
B.
User Interface Reference
71