Adam Equipment CBD Series Service Manual page 10

F2 Prt P Mo dE
P bAU d
PAritY
U id "U id"
" Abc234"
" "
SC id "Sc id"
" Abc234"
" "
tECH
@Adam Equipment Company 2007
"UnI t" "Lb"
Print
P Cont
SEr r E
b 600
b 1200
b 2400
b 4800
b 9600
8 n 1
7 E 1
7 o 1
Shows the current user ID (if any).
Enter a new User ID as described in the Description
under the PLU section. The ID can be alpha-
numeric but is limited to 6 characters.
Shows the current scale ID (if any).
Enter a new Scale ID as described in the
Description under the PLU section. The ID can be
alpha-numeric but is limited to 6 characters.
Allows access to the Technical parameters using a
password. Not normally accessed by user.
8
Lb only is enabled
Au oFF Prints only wh
the Auto-
Accumulation is
set to off.
Au on
Prints only when
the Auto-
Accumulation is
set to on.
Sets the RS-232 interface
to print continuously and
the accumulation function
is disabled.
Sets the RS-232 to print
continuously the weight
only.
Sets the required baud
rate (speed for the RS-
232 communications).
Default rate is 4800.
8 data bits, no parity
7 data bits, even parity
7 data bits, odd parity
en