Table of Contents
Advertisement
Configuration
MIR Feature Description
Maximum Information rate is configurable on both the MU and RU. The MIR function is performed on the
transmit side only and is based on a one second timing interval. During each one second timing interval, the
total bits transferred is compared to the MIR limit configured by the user. When the limit is exceeded, no more
data is sent and the packets in the queue will be dropped. This function is useful for reserving more bandwidth
in one direction than the other. If left wide open, the system will respond to bandwidth demand as needed,
allowing the full bandwidth of the channel to be used by either direction.
Example:
#> mir 10000
Success.
#>
Trango Broadband Wireless — Atlas5010
page 22
Advertisement
Table of Contents
Need help?
Do you have a question about the Atlas5010 and is the answer not in the manual?
Questions and answers