V-560 Uv/Vis Spectrophotometer Specifications - Jasco V-530 Hardware/Function Manual

Wavelength scanning
Wavelength moving speed
Data pitch
Baseline stability
Baseline flatness
Detector
Power requirements
Dimensions and weight
Note: Photometric repeatability, photometric accuracy and baseline flatness are the
values obtained more than one hour after the "Power" switch is turned ON.
1.3

V-560 UV/VIS Spectrophotometer Specifications

Optical system
Resolution
Light source
Light source
wavelength
Wavelength range
Wavelength repeatability
Wavelength accuracy
Spectral bandwidth
Wavelength display
Photometric mode
Photometric range
Photometric display
10, 20, 40, 100, 200, 400, 1000, 2000, 4000
nm/min
8000 nm/min
0.025, 0.05, 0.1, 0.2, 0.5, 1, 2, 5,10 nm/data
(spectrum measurement)
0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20 sec/data
(time course measurement)
±0.0004 Abs/hour
(value obtained more than one hour after
turning ON the power when temperature
variation is within 5°C, wavelength: 250 nm,
response: Slow, and spectral bandwidth: 2nm.)
±0.001 Abs
(value obtained after baseline correction when
temperature
wavelength: 200 to 850 nm, response: Medium,
spectral bandwidth: 2 nm, and wavelength
scanning: 100 nm/min)
Photomultiplier tube
100, 115, 200, 220, 230, 240 V ±10 %, 130 W
460(W)×595(D)×260(H)mm (excluding
protrusions)
30.5 kg
Double monochromator
UV/VIS region: 600 lines/mm plane grating
Czerny-Turner mount
Double beam type
0.1 nm
Deuterium lamp: 190 to 350 nm
Halogen lamp: 330 to 900 nm
changeover Any wavelength between 330 and 350 nm can
be selected.
190 to 900 nm
±0.1 nm (at a spectral bandwidth of 0.5 nm)
±0.3 nm (at a spectral bandwidth of 0.5 nm)
0.1, 0.2, 0.5, 1, 2, 5, 10 nm
L2, L5, L10 nm (low stray-light mode)
In increments of 0.1 nm
Abs, %T. %R, Sample, Reference
-2 to 5 Abs
0.0 to 200.0 %T
-2 to 5 Abs
variation
3
is within 5°C,