SEW-Eurodrive MOVIDYN DeviceNet AFD11A Manual page 2

Im portant Notes
Im portant Notes
•
•
•
•
2
Read this m anual carefully before you start the installation and startup of MOVIDYN
servo controllers with the AFD11A DeviceNet option.
This manual assumes that the user has access to and is familiar with the documentation on
®
the M OVIDYN system, in particular the M OVIDYN
Safety notes:
Always follow the safety and warning instructions contained in this manual!
Safety notes are marked as follows:
Electrical hazard, e.g. when working on live wires.
Mechanical hazard, e.g. when working on hoists.
Im portant instructions for safe and fault-free operation of the driven machine/
system, e.g. pre-setting before startup.
General safety notes on bus system s:
This communication system allows you to match the M OVIDYN
cifics of your application to a very high degree. As with all bus systems, there is a danger of
invisible, external (as far as the inverter is concerned) modifications to the parameters which
give rise to changes in the inverter's behavior. This may result in unexpected (not uncon-
trolled, though!) system behavior.
Each unit is manufactured and tested to current SEW-EURODRIVE technical standards and
specifications.
The manufacturer reserves the right to make changes to the technical data and designs as
well as the user interface herein described, which are in the interest of technical progress.
A requirement of fault-free operation and fulfillment of any rights to claim under guarantee is
that this information is observed.
®
operating instructions.
®
servo inverter to the spe-
®
M OVIDYN
®
DeviceNet AFD11A