Drive Test Using The Sinamics Control Panel - Siemens SIMATIC S7-300 Product Information

Commissioning
3.5 Diagnosing the SINAMICS configuration
3.5.2

Drive test using the SINAMICS control panel

Introduction
After the successful configuring of the SINAMICS S120 drive system, the drives can be
controlled and moved in speed-controlled operation using the drive control panel in
S7T Config.
Assuming control priority
Open the "S120_CU320" folder in S7T Config.
Select the Drives > Drive_1 > Commissioning > Control Panel command.
Select there the drive that is to be tested. Transfer the control priority to S7T Config by
clicking "Get control priority".
Read the security message.
76
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04