Siemens SIMATIC S7-300 Product Information page 40

Commissioning
3.4 Configuring the drive components
Configuring with Active Line Module (ALM)
1. In S7T Config, open the SINAMICS S120_CU320 folder, and double-click the
2. First create the control unit, and the option modules. If you are using the TB30 terminal
40
"Configure drive unit" entry or the drive.
board, select it from the drop-down list, and click the "Next" button to confirm the setting.
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04