Siemens SIMATIC S7-300 Product Information page 140

Expert Functions
5.2 Extending a PROFIdrive message frame
3. Open HW Config.
4. Open the object properties for SINAMICS S120 and click "Activate" on the
5. Open the "Details" tab and note the assignment of the PROFIBUS I/O addresses.
6. To extend a message frame, an additional setpoint or actual value slot must be inserted
140
"Configuration" tab.
Each object of the configuration has its own area that is ended with an axis disconnector.
in front of an axis separator. This slot will be interconnected later with a parameter in
S7T Config.
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04