Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
8.
Unscrew the inner panel and remove it.
WARNING: Steel edges can cut.
!
CAUTION : In the interior part of this inner panel there is a very delicate MICROTHERM
!
insulation panel. It has to be handled with extreme care. AVOID TOUCHING OR
BENDING IT.
9.
Do not disconnect the electrical heating elements. Remove the packing cardboard and the metallic plate.
Lift and tilt the elements outwards being careful not to damage the insulation on the bottom of the heater
and carefully place the storage bricks. Arrange two levels of bricks with the flat side facing to the back
of the heater.
10.
Place the heating elements back into their original position. Place the second row of storage bricks with
the flat side facing out and always on the heating elements supporting tabs.
11.
Next replace the metallic plate in the top of the storage core, between the bricks and the Microtherm
insulation panel with the flat side facing up. It must be placed in the right position for the fan to
work correctly.
Elnur powered by Gabarrón | ECOMBI HHR | Installation Guide
6
Hide quick links:
Advertisement
Table of Contents
