Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
12.
Place the third row of storage bricks with the flat side facing out.
13.
Refit the inner front panel. If the bricks have been fitted correctly you will have no difficulty in refitting the
panel. Make sure the bottom edge of the inner panel is inside the front lip of the heater. Please see below:
14.
Replace the front panel. When refitting the exterior front panel, align the 2 metal upper pegs on the heater
with holes in the exterior panel. Push the top up into place and push the bottom in, then refit the screws.
15.
Refit the front outlet grill along with the screws.
Elnur powered by Gabarrón | ECOMBI HHR | Installation Guide
7
Hide quick links:
Advertisement
Table of Contents
