Table 6 Main Led Definitions; Table 7 Ethernet Led Definitions; Table 8 Usb Led Definitions - Alpha Data ADM-VPX3-9Z2 User Manual

Comp. Ref.
D13 (Green)
D18 (Red)
D15 (Green)
D19 (Amber)
D14 (Red)
D11 (Red)
D12 (Green)
D16 (Green)
D17 (Green)
A further two sets of three LEDs provide an indication of the status of the two Ethernet interfaces
Comp. Ref.
D9 (Green)
D8 (Green)
D10 (Green)
D5 (Green)
D6 (Green)
D7 (Green)
Two Bi-Colour LEDs provide an indication of the status of the two USB interfaces
Comp. Ref.
D22 (Bi-Green) USB1 Status
D22 (Bi-Amber) USB1 Error
D21 (Bi-Green) USB2 Status
D21 (Bi-Amber) USB2 Error
Page 8
Function ON State
System Monitor
See Table 26
Status
System Monitor
See Table 26
Status
FPGA (PL)
PL is configured
Done
VPX JTAG
JTAG chain Connected to VPX P0
STATUS
Power Fault Power Supply Fault
PS Error PS Error
PS Status Normal Operation
SATA PHY Link Established
SATA DAS Data transfer in progress
Table 6 : Main LED Definitions
Function ON State
Ethernet 0
See Table 19
LED0
Ethernet 0
See Table 19
LED1
Ethernet 0
See Table 19
LED2
Ethernet 1
See Table 19
LED0
Ethernet 1
See Table 19
LED1
Ethernet 1
See Table 19
LED2
Table 7 : Ethernet LED Definitions
Function ON State
Normal Operation
Error
Normal Operation
Error
Table 8 : USB LED Definitions
ADM-VPX3-9Z2 User Manual
V1.1 - 16th January 2020
Off State
PL is not configured
JTAG chain isolated from VPX P0
Power Supplies off or within range
Normal Operation
PS is in Reset / Error
No Link
Disk Idle
Off State
Off State
Not Operational
Normal Operation
Not Operational
Normal Operation
Functional Description
ad-ug-1323_v1_1.pdf