Avaya Scopia XT Series Release Notes page 39

© 2017 Avaya Inc. All rights reserved
In a Call
In a Meeting
Software
Upgrade &
Downgrade
Release Notes for Avaya Scopia® XT Series
QC#22593 interoperability issue when it
placed a call towards an XT5000
MCU
If XT is configured with
RVSM-5252 Unicode name the ECS rejects
the H.323 call
Tandberg MXP Series
QC#26201 interoperability issue when
placing SIP TLS calls.
Presentation, sent in WCS mode
from an XT, is sent black from
RVELITE-6045
MCU7000 to other XT (8.3.x or
not in WCS mode)
You cannot dial a recent
incoming ISDN number from the
QC#9510
Recent Calls list.
(Incident #156601)
Before making an ISDN voice-
only call, you need to first
QC#9509 change the service mode to
manual.
(Incident #156599)
Advanced conference features
(meeting roster, Equinox
recording, meeting
management via UI, web
Equinox/Scopia
collaboration, chat via SC and
Conference
web) in a Equinox/Scopia
Features
Meeting are available only if XT
is managed by the iView hosting
the meeting or the solution is
9.x and the call is sip
MCU6000 doesn't manage
correctly the XT video privacy
MCURVELITE-3000
option ( auto or hide video)
when in a sip call
If you are using multiple
monitors and there is no
presentation, you cannot select
the PIP layout.
When connecting to a XT
embedded meeting not as first
RVXT5000-131 terminal, the arrows in FECC
page are not displayed after
"Control Far" selecting.
XT cannot send or receive
presentation if there is only one
QC#22715 XT Desktop Client in the
conference and that Client does
not have a webcam.
Embedded MCU license cannot
be enabled on systems with CPU
version lower than 2.0
XT Series refuses the downgrade
Downgrading to to a not signed version (8.3.X or
unsigned versions lower) in regular mode or in
recovery mode.
If you are updating a system
with PIC firmware rev 33
(implemented in versions up to
QC#18364
v3.1.019), the system might
keep rebooting, and the Codec
Unit's LED or logo blinks 3 or 5
Use a plain ASCII name for XT
Configure > Advanced > Protocols > SIP > TLS >
Enabled =No
Dial the ISDN number manually.
To make an ISDN Voice-Only call, perform the
following procedure:
From the web interface, select Administrator
Settings > Calls > Preferences > ISDN and change the
Service Mode to Manual.
Insert a different Service Code for 64K calls.
Add the same Service Code to the Gateway Service
Prefixes List and specify the type as voice-only.
Dial the ISDN/PSTN number and select 64K as the
required Call Rate (Advanced call options).
Check that your XT is able to access the meeting
roster (you should see Local – Your XT Name listed
in XT UI, Participants tab). If this entry is not
available, please check that your solution is 9.x and
invite XT as sip participant in the meeting (you can
invite XT by dialling xt@xtipaddress in your Equinox
client, or sip: xtipaddress in Scopia desktop/mobile
clients), or ask your Equinox Solution IT reference to
add XT as managed endpoint in the Equinox
Management server.
Configure > Advanced > System > Customization >
Set Privacy Options = Image
The camera of the active speaker in the embedded
MCU can be moved anyway
To downgrade XT to a version 8.3.X or lower, you
have to manually disable the "Verify Signature"
option in the Download menu for normal mode. For
recovery mode it is not possible to downgrade to an
unsigned version. You need to use a signed version
for recovery mode and then disable the above
option and downgrade the XT to previous version.
Disconnect and reconnect the power jack
connector.
Known Issues | 39