Cisco Firepower 2100 Series Getting Started Manual page 52

Power Off the Device
Power Off the Device
It's important that you shut down your system properly using FMC. Simply unplugging the power or pressing
the power switch can cause serious file system damage. Remember that there are many processes running in
the background all the time, and unplugging or shutting off the power does not allow the graceful shutdown
of your Firepower system.
Procedure
Step 1 Choose Devices > Device Management.
Step 2
Next to the device that you want to restart, click the edit icon (
Step 3 Click the Device tab.
Step 4
Click the shut down device icon (
Step 5 When prompted, confirm that you want to shut down the device.
Step 6
Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 7 After the chassis has successfully powered off, you can then unplug the power to physically remove power
from the chassis if necessary.
What's Next?
To continue configuring your FTD, see the documents available for your software version at
Cisco Firepower
For information related to using FMC, see the
Cisco Firepower 2100 Getting Started Guide
50
) in the System section.
Documentation.
Firepower Threat Defense Deployment with FMC
).
Firepower Management Center Configuration
Navigating the
Guide.