Configure The Asa - Cisco Firepower 2100 Series Getting Started Manual

Configure the ASA

a) Check Enable Smart license configuration.
b) From the Feature Tier drop-down list, choose Standard.
Only the Standard tier is available.
c) (Optional) For the Context license, enter the number of contexts.
You can use 2 contexts without a license. The maximum number of contexts depends on your model:
For example, to use the maximum of 25 contexts on the Firepower 2110, enter 23 for the number of
contexts; this value is added to the default of 2.
Step 8
(Optional) The Enable strong-encryption protocol is generally not required; for example, ASAs that use
older Satellite Server versions (pre-2.3.0) require this license, but you can check this box if you know you
need to, or if you want to track usage of this license in your account.
Step 9 Click Apply.
Step 10 Click the Save icon in the toolbar.
Step 11
Quit ASDM and relaunch it.
When you change licenses, you need to relaunch ASDM to show updated screens.
Configure the ASA
Using ASDM, you can use wizards to configure basic and advanced features. You can also manually configure
features not included in wizards.
Procedure
Step 1
Choose Wizards > Startup Wizard, and click the Modify existing configuration radio button.
Cisco Firepower 2100 Getting Started Guide
88
• Firepower 2110—25 contexts
• Firepower 2120—25 contexts
• Firepower 2130—30 contexts
• Firepower 2140—40 contexts
ASA Deployment in Platform Mode