Disassembly And Storage - Climax LM5200 Operating Manual

Disassembly and Storage

Retract the milling head from the work piece.
•
Remove the tooling.
•
Remove hoses.
•
Remove the milling head using a sling. (Not required, the milling head and ram can be
•
stored assembled if required.)
Remove the ram from the bed and place in storage container.
•
Remove the feed motor and install brakes on the ends of the ballscrews.
•
Attach lifting equipment to the beds using the supplied hoist rings.
•
Remove the machine from the work piece.
•
Clean the machine to remove dirt, grease, metal chips, and moisture.
•
Apply LPS lubricant to unpainted surfaces to prevent corrosion.
•
Store in the container provided.
•
Place desiccant bags or vapor wrap around the machine to absorb moisture.
•
Climax advises changing the desiccant bags in the storage crate every 18 months.
P/N 66188, Rev. 5 Page 59