Preparing Motor Cables (Motor End); Motor Series Akm2 - Kollmorgen AKD 2G Accessories Manual

AKD2G/AKD/S700 Accessories Manual | 13 Cables

13.5 Preparing Motor Cables (Motor End)

13.5.1 Motor Series AKM2...8, 6SMx7, DBL2...6, DBK
Please note that different conductor cross-sections are required for different motors, and for motors with a
holding brake, the brake signals are also attached through this connector.
Connections: The view is as seen from the contact side of the connector:
Standard (size 1), wire max 4mm 2
Option H (size 1.5), wire max. 10mm 2
62 Kollmorgen™ | kdn.kollmorgen.com | November 2019
Pin Signal Pin Signal
1 U2 A
4 V2 B
3 W2 C
(2) PE D
Pin Signal Pin Signal
U U2 + + Br
V V2 - - Br
W W2 1 n.c.
PE 2 n.c.
+ Br
- Br
n.c.
n.c.